Statguard® Floor Care System

1. Statguard® Stripper

Unlocks our ESD polymers with the least amount of labour while minimising the pH level needed to rinse and neutralise. The Statguard® Stripper can save one or two labour rinse steps which cuts down labour time and can save you money. Typically 80% of the cost of maintaining a tile floor is labour. Cutting down the labour time is a savings to both the Building Service Contractor and the Customer.

2. Statguard® Neutraliser

Saves rinse steps to bring your stripped floor to the correct pH level before you apply our Statguard® Dissipative Floor Finish. Again, saving steps is saving time and cost. Reaching the correct pH level ensures the proper hardening of our finish and will help extend the life of the floor.

3. Statguard® Dissipative Floor Finish

Exceeds the required limits of EN 61340-5-1 for Resistance (operator grounding) of <1.0 x 109 ohms when tested per IEC 61340-4-1 and Operator Charge Generation of < 100 volts when tested per IEC 61340-4-1 when proper ESD footwear is used.